Dimensions | |||
---|---|---|---|
Large Bore B1 |
1.000 in |
Small Bore B2 |
0.750 in |
Keyway K1 |
1/4 in |
Keyway K2 |
3/16 in |
B1 Shaft Penetration |
1.099 in |
B2 Shaft Penetration |
1.099 in |
Outer Diameter OD |
2.000 in |
Bore Tolerance |
+.001 in / -.000 in |
Length L |
2.313 in |
Hub Width LH |
0.810 in |
Fastening Hardware | |||
Forged Set Screw |
M6 |
Screw Material |
Alloy Steel |
Hex Wrench Size |
3.0 mm |
Screw Finish |
Black Oxide |
Seating Torque |
7.2 Nm |
Number of Screws |
4 ea |
Performance Specifications | |||
Static Torque |
400 lb-in |
Angular Misalignment |
2.0° |
Dynamic Torque Non-Reversing |
200 lb-in |
Parallel Misalignment |
0.010 in |
Dynamic Torque Reversing |
100 lb-in |
Axial Motion |
0.020 in |
Torsional Stiffness |
950 lb-in/Deg |
Maximum Speed |
10,000 RPM |
Additional Information | |||
Material Specification |
Hubs: 2024-T351 Aluminum Bar |
Temperature |
-40°F to 200°F |
Finish Specification |
Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize |
Manufacturer |
Ruland Manufacturing |
Country of Origin |
USA |
Weight (lbs.) |
0.4400 |
UPC |
63452917200 |
||
Product Notes | |||
Note 1 |
Stainless steel hubs are available upon request. |
Note 2 |
Torque ratings are at maximum misalignment. |
Note 3 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
Note 4 |
Torque ratings for the couplings are based on the physical limitations/failure point of the metal bellows. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the metal bellows. Please consult technical support for more assistance. |
Prop 65 |
|