Dimensions | |||
---|---|---|---|
Large Bore B1 |
0.500 in |
Small Bore B2 |
0.313 in |
Keyway K1 |
1/8 in |
Keyway K2 |
NK |
B1 Shaft Penetration |
0.804 in |
B2 Shaft Penetration |
0.804 in |
Outer Diameter OD |
1.313 in |
Bore Tolerance |
+.001 in / -.000 in |
Length L |
1.688 in |
Hub Width LH |
0.590 in |
Fastening Hardware | |||
Forged Clamp Screw |
M3 |
Screw Material |
Alloy Steel |
Hex Wrench Size |
2.5 mm |
Screw Finish |
Black Oxide |
Seating Torque |
2.1 Nm |
Number of Screws |
2 ea |
Performance Specifications | |||
Static Torque |
120 lb-in |
Angular Misalignment |
1.5° |
Dynamic Torque Non-Reversing |
60 lb-in |
Parallel Misalignment |
0.006 in |
Dynamic Torque Reversing |
30 lb-in |
Axial Motion |
0.016 in |
Torsional Stiffness |
400 lb-in/Deg |
Maximum Speed |
10,000 RPM |
Additional Information | |||
Material Specification |
Hubs: 2024-T351 Aluminum Bar |
Temperature |
-40°F to 200°F |
Finish Specification |
Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize |
Manufacturer |
Ruland Manufacturing |
Country of Origin |
USA |
Weight (lbs.) |
0.1650 |
UPC |
63452916509 |
||
Product Notes | |||
Note 1 |
Stainless steel hubs are available upon request. |
Note 2 |
Torque ratings are at maximum misalignment. |
Note 3 |
Performance ratings are for guidance only. The user must determine suitability for a particular application. |
Note 4 |
Torque ratings for the couplings are based on the physical limitations/failure point of the metal bellows. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the metal bellows. Please consult technical support for more assistance. |
Prop 65 |
|