| |
*CAUTION: This is failure mode. See Liability Disclaimer at bottom of this page.
| Shaft Collars with Inch Dimensions |
|
Part Number |
Bore
(in) |
Screw Size |
Screw Torque
(lb-in) |
Slippage
On Shaft* (lb) |
|
CL-4-F |
0.250 |
#4-40 |
15 |
200 (HARD) |
|
CL-4-SS |
0.250 |
#4-40 |
8 |
150 (HARD) |
|
SC-4-F |
0.250 |
#8-32 |
15 |
350 (SOFT) |
|
SC-4-SS |
0.250 |
#8-32 |
12 |
200 (SOFT) |
|
CL-6-F |
0.375 |
#6-32 |
28 |
600 (HARD) |
|
CL-6-SS |
0.375 |
#6-32 |
15 |
200 (HARD) |
|
CL-8-A |
0.500 |
#8-32 |
49 |
1200 (SOFT) |
|
CL-8-F |
0.500 |
#8-32 |
49 |
1000 (HARD) |
|
CL-8-SS |
0.500 |
#8-32 |
28 |
600 (HARD) |
|
SC-8-F |
0.500 |
1/4-20 |
75 |
950 (SOFT) |
|
SC-8-SS |
0.500 |
1/4-20 |
60 |
500 (SOFT) |
|
SP-8-A |
0.500 |
#8-32 |
49 |
1250 (SOFT) |
|
SP-8-SS |
0.500 |
#8-32 |
28 |
900 (HARD) |
|
CL-10-F |
0.625 |
#10-32 |
76 |
2400 (SOFT) |
|
CL-10-SS |
0.625 |
#10-32 |
45 |
800 (SOFT) |
|
SC-10-F |
0.625 |
5/16-18 |
165 |
1500 (SOFT) |
|
SC-10-SS |
0.625 |
5/16-18 |
130 |
900 (SOFT) |
|
CL-12-A |
0.750 |
1/4-28 |
170 |
3700 (HARD) |
|
CL-12-F |
0.750 |
1/4-28 |
170 |
3500 (HARD) |
|
CL-12-SS |
0.750 |
1/4-28 |
110 |
1400 (SOFT) |
|
SC-12-A |
0.750 |
5/16-18 |
165 |
1400 (SOFT) |
|
SC-12-F |
0.750 |
5/16-18 |
165 |
1600 (SOFT) |
|
SC-12-SS |
0.750 |
5/16-18 |
130 |
1100 (SOFT) |
|
SP-12-SS |
0.750 |
1/4-28 |
110 |
1600 (SOFT) |
|
SP-16-F |
1.000 |
1/4-28 |
170 |
3000 (HARD) |
|
SP-16-SS |
1.000 |
1/4-28 |
110 |
1700 (HARD) |
|
CL-24-F |
1.500 |
1/4-28 |
170 |
2900 (HARD) |
|
CL-24-SS |
1.500 |
1/4-28 |
110 |
1900 (HARD) |
|
SC-24-F |
1.500 |
3/8-16 |
290 |
2100 (SOFT) |
|
SC-24-SS |
1.500 |
3/8-16 |
230 |
1200 (SOFT) |
|
CL-32-F |
2.000 |
5/16-24 |
325 |
8000 (HARD) |
|
CL-32-SS |
2.000 |
5/16-24 |
190 |
2700 (HARD) |
|
SC-32-F |
2.000 |
1/2-13 |
620 |
2900 (SOFT) |
|
SC-32-SS |
2.000 |
1/2-13 |
500 |
1200 (HARD) |
|
CL-48-F |
3.000 |
3/8-24 |
570 |
8000 (SOFT) |
|
CL-48-SS |
3.000 |
3/8-24 |
345 |
3700 (HARD) |
|
SC-48-F |
3.000 |
1/2-13 |
620 |
3100 (SOFT) |
|
SC-48-SS |
3.000 |
1/2-13 |
500 |
1800 (SOFT) |
| Shaft Collars with Metric Dimensions |
| Part Number |
Bore
(in)
|
Screw Size |
Screw Torque
(Nm) |
Slippage
On Shaft* (N) |
|
MCL-8-A |
8mm |
M3 |
2,1 |
2650 |
|
MSP-8-A |
8mm |
M3 |
2,1 |
3200 |
|
MCL-8-F |
8mm |
M3 |
2,1 |
4450 |
|
MSP-8-F |
8mm |
M3 |
2,1 |
4800 |
|
MCL-8-SS |
8mm |
M3 |
1,1 |
1000 |
|
MSP-8-SS |
8mm |
M3 |
1,1 |
1150 |
|
MCL-12-A |
12mm |
M4 |
4,6 |
5950 |
|
MSP-12-A |
12mm |
M4 |
4,6 |
6200 |
|
MCL-12-F |
12mm |
M4 |
4,6 |
6450 |
|
MSP-12-F |
12mm |
M4 |
4,6 |
7150 |
|
MCL-12-SS |
12mm |
M4 |
2,5 |
1350 |
|
MSP-12-SS |
12mm |
M4 |
2,5 |
2000 |
|
MCL-25-A |
25mm |
M6 |
16,0 |
15800 |
|
MSP-25-A |
25mm |
M6 |
16,0 |
16450 |
|
MCL-25-F |
25mm |
M6 |
16,0 |
18700 |
|
MSP-25-F |
25mm |
M6 |
16,0 |
19100 |
|
MCL-25-SS |
25mm |
M6 |
9,6 |
5300 |
|
MSP-25-SS |
25mm |
M6 |
9,6 |
6150 |
|
MCL-50-A |
50mm |
M8 |
39,0 |
27000 |
|
MSP-50-A |
50mm |
M8 |
39,0 |
28000 |
|
MCL-50-F |
50mm |
M8 |
39,0 |
40000 |
|
MSP-50-F |
50mm |
M8 |
39,0 |
40850 |
|
MCL-50-SS |
50mm |
M8 |
23,0 |
10000 |
|
MSP-50-SS |
50mm |
M8 |
23,0 |
11450 |
|
LIABILITY DISCLAIMER
The information chart presented on this page are typical values under certain test conditions and are not a guarantee of average values nor a guarantee of maximum or minimum values under all conditions. Thrust values shown are FAILURE MODE. They are shown solely for the reader to utilize appropriate testing equipment to make his/her own evaluation, and are not intended by Ruland Manufacturing Company, Inc., as warranties, either express or implied, of fitness for a given purpose. A full disclaimer and limited warranty can also be found on this site.
|
|
|
