View Cart  |  My Account
Jaw Couplings Shaft Collar in Shell
grey block
 

Jaw Coupling Spiders

Spider couplings with available jaw coupling spiders

Features

85 Shore A-Blue (Soft Spider)
  • Greatest dampening characteristics
  • Best for angular and parallel misalignment
  • Maximum speed: 8,000 RPM
  • Temperature Range: -10°F to 180°F

92 Shore A-Yellow
  • Good all around characteristics
  • Maximum speed: 8,000 RPM
  • Temperature Range: -10°F to 180°F

98 Shore A-Red (Hard Spider)
  • Greatest torsional stiffness
  • Highest torque capabilities
  • Most commonly used spider
  • Maximum speed: 8,000 RPM
  • Temperature Range: -10°F to 180°F

  

How to Order

Complete Coupling: Jaw couplings are an assembly of two hubs and one spider

Hubs: Choose two hubs in inch or metric in any style with the same outside diameter

Spider: Choose spider to match performance criteria. The spider must have the same outside diameter as both hubs.

Each hub and spider is sold separately
 
Jaw Couplings
Jaw Coupling Hub
Jaw Coupling Spider
Coupling Support Form
Product Index
 
 
  Jaw Coupling Spiders | Click part number for 3D CAD file and pricing
Part Number Durometer/ Color Outer
Diameter
OD 		Torsional
Stiffness
 Nominal
Torque
 Peak
Torque
 MISALIGNMENT
Angular Parallel Axial Motion
(Deg/lb-in) (Deg/Nm)
(lb-in) (Nm)
(lb-in) (Nm)
(Deg)
in mm
in mm
JD10/15-98R 98 Shore A RED 0.590"/
15.0mm
0.121 1.068
8 0.9
16 1.8
0.8
0.002 0.05
0.020 0.51
JD10/15-92Y 92 Shore A YELLOW
0.270 2.384
5 0.6
10 1.1
0.9
0.004 0.10
0.020 0.51
JD10/15-85B 85 Shore A BLUE
0.450 3.972
2.4 0.3
4.8 0.5
1.0
0.005 0.13
0.020 0.51
JD12/19-98R 98 Shore A RED 0.750"/
19.1mm
0.024 1.007
15 1.7
30 3.4
0.8
0.003 0.05
0.020 0.51
JD12/19-92Y 92 Shore A YELLOW
0.257 2.269
9 1.0
18 2.0
0.9
0.004 0.10
0.020 0.51
JD12/19-85B 85 Shore A BLUE
0.406 3.583
5 0.6
10 1.1
1.0
0.005 0.13
0.020 0.51
JD16/25-98R 98 Shore A RED 1.000"/
25.4mm
0.024 0.212
75 8.5
150 17.0
0.8
0.003 0.08
0.030 0.76
JD16/25-92Y 92 Shore A YELLOW
0.067 2.592
29 3.3
58 6.6
0.9
0.005 0.13
0.030 0.76
JD16/25-85B 85 Shore A BLUE
0.108 0.953
15 1.7
30 3.4
1.0
0.006 0.15
0.030 0.76
JD21/33-98R 98 Shore A RED 1.313"/
33.3mm
0.012 0.106
87 9.9
174 19.7
0.8
0.003 0.08
0.030 0.76
JD21/33-92Y 92 Shore A YELLOW
0.045 0.397
35 4.0
70 7.9
0.9
0.005 0.13
0.030 0.76
JD21/33-85B 85 Shore A BLUE
0.075 0.662
18 2.0
36 4.1
1.0
0.006 0.15
0.030 0.76
JD26/41-98R 98 Shore A RED 1.625"/
41.3mm
0.006 0.053
165 18.7
330 37.4
0.8
0.004 0.10
0.050 1.27
JD26/41-92Y 92 Shore A YELLOW
0.012 0.106
97 11.0
194 22.0
0.9
0.006 0.15
0.050 1.27
JD32/51-98R 98 Shore A RED 2.000"/
50.8mm
0.004 0.035
275 31.2
550 62.3
0.8
0.005 0.13
0.050 1.27
JD32/51-92Y 92 Shore A YELLOW
0.005 0.044
220 24.9
440 49.8
0.9
0.006 0.15
0.050 1.27
JD36/57-98R 98 Shore A RED 2.250"/
57.2mm
0.003 0.026
410 46.5
820 92.9
0.8
0.004 0.10
0.050 1.27
JD36/57-92Y 92 Shore A YELLOW
0.004 0.035
285 32.3
570 64.6
0.9
0.005 0.13
0.050 1.27

 

Note 1 Performance ratings are for guidance only. The user must determine suitability for a particular application.
Note 2 Torque ratings for the couplings are based on the physical limitations/failure point of the spiders. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the nominal torque of the spiders. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.

<< Back