Customer Service Helpline (800) 225-4234
RULAND Carefully Made Shaft Collars and Couplings German Chinese English since 1937 Home
Flexible Beam Couplings Shaft Collar in Shell
grey block
 

MWC Flexible Beam Coupling - Stainless Steel

Stainless Steel Clamp Style Flexible Beam Coupling

Features

  • Zero-backlash
  • Torsionally rigid with dampening
  • Maximum Speed: 6,000 RPM
  • Temperature Range: -40°F to 350°F



 distributor

How to Order

Choose any Bore 1 and any Bore 2 available in a body size. Part numbers are in the following format with numbers representing millimeters:

order mwc
P-Series Aluminum Four Beam Couplings
P-Series Stainless Steel Four Beam Couplings
F-Series Aluminum Six Beam Couplings
F-Series Stainless Steel Six Beam Couplings
M-Series Four Beam Couplings
 
  Click part number for 3D CAD file
Part
Number		 Bore B1
(mm)		 Bore B2
(mm)		 Outer
Diameter
OD (mm)		 Length
L (mm)		 Cap
Screw		 Shaft
Penetration
(mm)		 Static
Torque
(Nm)		 Torsional
Stiffness
(Deg/Nm)		 MISALIGNMENT
Angular Parallel (mm) Axial Motion (mm) Moment
of Inertia
(x10 - 6
kg-m² )
MWC15
3
4
5
3
4
5
15 22 M2 10.41
1.30
1.30
1.20
2.23
2.23
2.52
3° 0.20 0.12 0.731
MWC20
4
5
6
4
5
6
20 28 M3 13.34
2.00
2.00
1.70
0.98
0.98
1.29
3° 0.20 0.12 2.984
MWC25
6
7
8
9
10
6
7
8
9
10
25 30 M3 13.79
5.10
 
5.10
 
4.60
0.58
 
0.58
 
0.83
3° 0.38 0.25 7.871
MWC30
8
9
10
12
8
9
10
12
30 38 M4 17.65
10.40
 
10.40
10.00
0.33
 
0.33
0.46
3° 0.38 0.25 20.920

 

Note 1 Static torque ratings are at maximum misalignment. To obtain dynamic rating, static ratings should be divided by 2 for non-reversing applications and by 4 for reversing applications.
Note 2 Hardware is alloy steel with black oxide finish. Stainless steel hardware is available upon request. MWC series parts have two socketed head cap screws on each end.
Note 3 Performance ratings are for guidance only. The user must determine suitability for a particular application.
Note 4 Coupling torque and torsional stiffness are determined by the largest bore selected.
Note 5 Shafts may penetrate up to 0.5 x L. Be certain shafts do not touch.

<< Back