View Cart  |  My Account
Disc Couplings Shaft Collar in Shell
grey block
 

MDCS - Metric Clamp Single Disc Coupling

Metric Clamp Single Disc Coupling MDCS Line Drawing

Features

  • Compact design
  • Zero backlash
  • High torsional stiffness
  • Balanced for high RPM
  • Long maintenance-free life
  • Aluminum for low inertia
  • Bore tolerance: +.03mm/-.00mm
  • Maximum speed: 10,000 RPM
  • Temperature Range: -10°F to 200°F

 

Notes

  • Aluminum hubs are standard
  • Hubs available in stainless steel

 

How to Specify

Choose any Bore 1 and any Bore 2 available in a body size. Part numbers are in the following format with numbers representing millimeters:

order mdcs

Inch to Metric Bore Combinations

  • Inch and metric hubs with the same outside diameter can be combined into a single coupling
  • For help on inch to metric bore combinations please email


 
Disc Couplings
Single Disc Coupling
Double Disc Coupling
Electrically Isolating
Double Disc Coupling
Coupling Support Form
Product Index
 
 
  Click Right Arrow to expand table | Click part number for 3D CAD file and pricing
Part Number Bore 1
B1 (mm)
Bore 2
B2 (mm)
Outer
Diameter
OD (mm)
Length
L (mm)
Hub
Width
LH (mm)
Clamp
Screw
Static
Torque
(Nm)
Torsional
Stiffness
(Nm/Deg)
MISALIGNMENT
Angular (Deg) Parallel
(mm)
Axial Motion (mm)
MDCS15 3mm to 6mm 15.0 18.3 8.3 M2 1.7 5.6
0.5° - 0.05
MDCS15-3-3-A 3 3 15.0 18.3 8.3 M2 1.7 5.6
0.5° - 0.05
MDCS15-4-3-A 4 3
MDCS15-4-4-A 4 4
MDCS15-5-3-A 5 3
MDCS15-5-4-A 5 4
MDCS15-5-5-A 5 5
MDCS15-6-3-A 6 3
MDCS15-6-4-A 6 4
MDCS15-6-5-A 6 5
MDCS15-6-6-A 6 6
MDCS19 4mm to 8mm 19.1 23.0 10.6 M2.5 2.8 8.7
- 0.10
MDCS19-4-4-A 4 4 19.1 23 10.6 M2.5 2.8 8.7
- 0.10
MDCS19-5-4-A 5 4
MDCS19-5-5-A 5 5
MDCS19-6-4-A 6 4
MDCS19-6-5-A 6 5
MDCS19-6-6-A 6 6
MDCS19-8-4-A 8 4
MDCS19-8-5-A 8 5
MDCS19-8-6-A 8 6
MDCS19-8-8-A 8 8
MDCS25 6mm to 12mm 25.4 26.2 11.8 M3 5.6 10.6
- 0.15
MDCS25-6-6-A 6 6 25.4 26.2 11.8 M3 5.6 10.6
- 0.15
MDCS25-8-6-A 8 6
MDCS25-8-8-A 8 8
MDCS25-10-6-A 10 6
MDCS25-10-8-A 10 8
MDCS25-10-10-A 10 10
MDCS25-12-6-A 12* 6
MDCS25-12-8-A 12* 8
MDCS25-12-10-A 12* 10
MDCS25-12-12-A 12* 12*
MDCS33 8mm to 16mm 33.3 33.3 15 M3 11.3 35.4
- 0.20
MDCS41 10mm to 20mm 41.3 39.7 18.0 M4 20.3 70.6
- 0.25
MDCS51 12mm to 25mm 50.8 46.1 20.6 M5 39.6 98
- 0.32
MDCS57 14mm to 30mm 57.2 58.8 26.7 M6 50.9 113
- 0.38

 

Note 1 Static torque ratings are at maximum misalignment. To obtain dynamic rating, static ratings should be divided by 2 for non-reversing applications and by 4 for reversing applications.
Note 2 Hardware is alloy steel with black oxide finish.
Note 3 Performance ratings are for guidance only. The user must determine suitability for a particular application.
Note 4 Ratings are for standard couplings supplied with black anodized aluminum hubs. Stainless steel hubs available upon request.
Note 5 Torque ratings for the couplings are based on the physical limitations/failure point of the disc springs. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the disc springs. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.
Note * Shaft can only be insterted into hub upto LH dimension.

<< Back