‚Äč
Disc Couplings
grey block
 

DCS - Clamp Style Single Disc Coupling

Clamp Single Disc Coupling DCS Line Drawing

Features

  • High torque
  • Balanced design for high RPM
  • Low Inertia
  • No maintenance
  • High torsional stiffness
  • Constant velocity
  • Long life
  • Zero backlash
  • RoHS2 and REACH Compliant
  • Maximum speed: 10,000 RPM
  • Bore tolerance: +.001"/-.000"
  • Temperature Range: -10°F to 200°F

Notes

  • Aluminum hubs are standard
  • Hubs available in stainless steel
 

How to Specify

Part numbers are in the following format with numbers representing sixteenths of an inch:

order bc

Inch to Metric Bore Combinations

  • Inch to metric bore combinations are available on the single disc coupling conversion page
  • For help on inch to metric bore combinations please email

 
 
Request Information
 
 
Full Name

Organization

Email Address

Phone Number

Request/ Question




Yes, I would like to be notified about product updates.
 
 
  Click part number for full technical specs, CAD files, and pricing
Part Number Large
Bore
B1 (in)
Small
Bore
B2 (in)
Outer
Diameter
OD (in)
Length
L (in)
Hub
Width
LH (in)
Clamp
Screw
Static
Torque
(lb-in)
Torsional
Stiffness
(lb-in/Deg)
Angular
(Deg)
Parallel
(in)
Axial
Motion
(in)
                     
DCS10-2-2-A 0.125 0.125 0.590 0.719 0.328 M2 15 50 0.5° 0.00 0.002
DCS10-3-2-A 0.188 0.125 0.590 0.719 0.328 M2 15 50 0.5° 0.00 0.002
DCS10-3-3-A 0.188 0.188 0.590 0.719 0.328 M2 15 50 0.5° 0.00 0.002
DCS10-4-2-A 0.250 0.125 0.590 0.719 0.328 M2 15 50 0.5° 0.00 0.002
DCS10-4-3-A 0.250 0.188 0.590 0.719 0.328 M2 15 50 0.5° 0.00 0.002
DCS10-4-4-A 0.250 0.250 0.590 0.719 0.328 M2 15 50 0.5° 0.00 0.002
DCS12-3-3-A 0.188 0.188 0.750 0.906 0.418 M2.5 25 77 1.0° 0.00 0.004
DCS12-4-3-A 0.250 0.188 0.750 0.906 0.418 M2.5 25 77 1.0° 0.00 0.004
DCS12-4-4-A 0.250 0.250 0.750 0.906 0.418 M2.5 25 77 1.0° 0.00 0.004
DCS12-5-3-A 0.313 0.188 0.750 0.906 0.418 M2.5 25 77 1.0° 0.00 0.004
DCS12-5-4-A 0.313 0.250 0.750 0.906 0.418 M2.5 25 77 1.0° 0.00 0.004
DCS12-5-5-A 0.313 0.313 0.750 0.906 0.418 M2.5 25 77 1.0° 0.00 0.004
DCS16-4-4-A 0.250 0.250 1.000 1.031 0.467 M3 50 94 1.0° 0.00 0.006
DCS16-5-4-A 0.313 0.250 1.000 1.031 0.467 M3 50 94 1.0° 0.00 0.006
DCS16-5-5-A 0.313 0.313 1.000 1.031 0.467 M3 50 94 1.0° 0.00 0.006
DCS16-6-4-A 0.375 0.250 1.000 1.031 0.467 M3 50 94 1.0° 0.00 0.006
DCS16-6-5-A 0.375 0.313 1.000 1.031 0.467 M3 50 94 1.0° 0.00 0.006
DCS16-6-6-A 0.375 0.375 1.000 1.031 0.467 M3 50 94 1.0° 0.00 0.006
DCS16-8-4-A 0.500 0.250 1.000 1.031 0.467 M3 50 94 1.0° 0.00 0.006
DCS16-8-5-A 0.500 0.313 1.000 1.031 0.467 M3 50 94 1.0° 0.00 0.006
DCS16-8-6-A 0.500 0.375 1.000 1.031 0.467 M3 50 94 1.0° 0.00 0.006
DCS16-8-8-A 0.500 0.500 1.000 1.031 0.467 M3 50 94 1.0° 0.00 0.006
DCS21-10-10-A 0.625 0.625 1.313 1.313 0.590 M3 100 313 1.0° 0.00 0.008
DCS21-10-5-A 0.625 0.313 1.313 1.313 0.590 M3 100 313 1.0° 0.00 0.008
DCS21-10-6-A 0.625 0.375 1.313 1.313 0.590 M3 100 313 1.0° 0.00 0.008
DCS21-10-8-A 0.625 0.500 1.313 1.313 0.590 M3 100 313 1.0° 0.00 0.008
DCS21-5-5-A 0.313 0.313 1.313 1.313 0.590 M3 100 313 1.0° 0.00 0.008
DCS21-6-5-A 0.375 0.313 1.313 1.313 0.590 M3 100 313 1.0° 0.00 0.008
DCS21-6-6-A 0.375 0.375 1.313 1.313 0.590 M3 100 313 1.0° 0.00 0.008
DCS21-8-5-A 0.500 0.313 1.313 1.313 0.590 M3 100 313 1.0° 0.00 0.008
DCS21-8-6-A 0.500 0.375 1.313 1.313 0.590 M3 100 313 1.0° 0.00 0.008
DCS21-8-8-A 0.500 0.500 1.313 1.313 0.590 M3 100 313 1.0° 0.00 0.008
DCS26-10-10-A 0.625 0.625 1.625 1.563 0.710 M4 180 625 1.0° 0.00 0.010
DCS26-10-6-A 0.625 0.375 1.625 1.563 0.710 M4 180 625 1.0° 0.00 0.010
DCS26-10-8-A 0.625 0.500 1.625 1.563 0.710 M4 180 625 1.0° 0.00 0.010
DCS26-12-10-A 0.750 0.625 1.625 1.563 0.710 M4 180 625 1.0° 0.00 0.010
DCS26-12-12-A 0.750 0.750 1.625 1.563 0.710 M4 180 625 1.0° 0.00 0.010
DCS26-12-6-A 0.750 0.375 1.625 1.563 0.710 M4 180 625 1.0° 0.00 0.010
DCS26-12-8-A 0.750 0.500 1.625 1.563 0.710 M4 180 625 1.0° 0.00 0.010
DCS26-6-6-A 0.375 0.375 1.625 1.563 0.710 M4 180 625 1.0° 0.00 0.010
DCS26-8-6-A 0.500 0.375 1.625 1.563 0.710 M4 180 625 1.0° 0.00 0.010
DCS26-8-8-A 0.500 0.500 1.625 1.563 0.710 M4 180 625 1.0° 0.00 0.010
DCS32-10-10-A 0.625 0.625 2.000 1.813 0.810 M5 350 867 1.0° 0.00 0.012
DCS32-10-8-A 0.625 0.500 2.000 1.813 0.810 M5 350 867 1.0° 0.00 0.012
DCS32-12-10-A 0.750 0.625 2.000 1.813 0.810 M5 350 867 1.0° 0.00 0.012
DCS32-12-12-A 0.750 0.750 2.000 1.813 0.810 M5 350 867 1.0° 0.00 0.012
DCS32-12-8-A 0.750 0.500 2.000 1.813 0.810 M5 350 867 1.0° 0.00 0.012
DCS32-14-10-A 0.875 0.625 2.000 1.813 0.810 M5 350 867 1.0° 0.00 0.012
DCS32-14-12-A 0.875 0.750 2.000 1.813 0.810 M5 350 867 1.0° 0.00 0.012
DCS32-14-14-A 0.875 0.875 2.000 1.813 0.810 M5 350 867 1.0° 0.00 0.012
DCS32-14-8-A 0.875 0.500 2.000 1.813 0.810 M5 350 867 1.0° 0.00 0.012
DCS32-16-10-A 1.000 0.625 2.000 1.813 0.810 M5 350 867 1.0° 0.00 0.012
DCS32-16-12-A 1.000 0.750 2.000 1.813 0.810 M5 350 867 1.0° 0.00 0.012
DCS32-16-14-A 1.000 0.875 2.000 1.813 0.810 M5 350 867 1.0° 0.00 0.012
DCS32-16-16-A 1.000 1.000 2.000 1.813 0.810 M5 350 867 1.0° 0.00 0.012
DCS32-16-8-A 1.000 0.500 2.000 1.813 0.810 M5 350 867 1.0° 0.00 0.012
DCS32-8-8-A 0.500 0.500 2.000 1.813 0.810 M5 350 867 1.0° 0.00 0.012
DCS36-10-10-A 0.625 0.625 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-10-8-A 0.625 0.500 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-12-10-A 0.750 0.625 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-12-12-A 0.750 0.750 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-12-8-A 0.750 0.500 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-14-10-A 0.875 0.625 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-14-12-A 0.875 0.750 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-14-14-A 0.875 0.875 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-14-8-A 0.875 0.500 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-16-10-A 1.000 0.625 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-16-12-A 1.000 0.750 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-16-14-A 1.000 0.875 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-16-16-A 1.000 1.000 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-16-8-A 1.000 0.500 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-18-10-A 1.125 0.625 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-18-12-A 1.125 0.750 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-18-14-A 1.125 0.875 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-18-16-A 1.125 1.000 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-18-18-A 1.125 1.125 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-18-8-A 1.125 0.500 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-20-10-A 1.250 0.625 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-20-12-A 1.250 0.750 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-20-14-A 1.250 0.875 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-20-16-A 1.250 1.000 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-20-18-A 1.250 1.125 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-20-20-A 1.250 1.250 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-20-8-A 1.250 0.500 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
DCS36-8-8-A 0.500 0.500 2.250 2.313 1.050 M6 450 1000 1.0° 0.00 0.015
 
Note 1 Static torque ratings are at maximum misalignment. To obtain dynamic rating, static ratings should be divided by 2 for non-reversing applications and by 4 for reversing applications.
Note 2 Hardware is alloy steel with black oxide finish.
Note 3 Performance ratings are for guidance only. The user must determine suitability for a particular application.
Note 4 Ratings are for standard couplings supplied with black anodized aluminum hubs. Stainless steel hubs available upon request.
Note 5 Torque ratings for the couplings are based on the physical limitations/failure point of the disc springs. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the disc springs. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.
<< Back